NEC SV9100 User's Information Guide

5
Other Features
Speed Dial Lists
ABB (alphabetical system speed dial list)
EXT (Intercompany extension list)
STA (Button) please see SV9110 User Guide for instructions on this feature
TELBK (Group list) please see SV9110 User Guide for instructions on this feature
Using the System Speed Dial (A.K.A. ABB Directory list)
Press “Redial” cursor
Use cursor up and down or softkey up and down arrows to scroll through list
When desired name appears, pick up handset or press speaker button to dial.
See your System Administrator for programming this list.
Caller ID lists
Redial
Press “List” softkey
Press “Redial” softkey
Use cursor up and down or softkey up and down arrows to scroll through list
When desired number appears, pick up handset or press speaker button to dial.
CID (Incoming caller I.D.)
Press “List” softkey
Press “CID” softkey
Use cursor up and down or softkey up and down arrows to scroll through list
When desired number appears, pick up handset or press speaker button to dial.
Phone settings
To Adjust Handset Receiver Volume
Press the Up/Down key in the off-hook status or during the call.
To Adjust Speaker Volume
Press the Up/Down key during speakerphone operation or during the call.
To Adjust Ringer Tone
Press the Up/Down key during ringing.
To Adjust LCD Contrast
Press the Up/Down key in the on-hook status.

NEC SV9100 Specifications

General

Unified Messaging	Yes
VoIP Support	Yes
SIP Support	Yes
VoIP Protocols	SIP, H.323
Mobility	Yes
Type	IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C (32°F to 104°F)
Humidity	10% to 90% (non-condensing)
System Type	Hybrid (Supports Analog, Digital, and IP)