NEC SV9100 User's Information Guide

9
Advanced Features
Conference Calling
Establish an intercom or outside call.
Press “Conf” softkey or the “CONF” button
Dial the extension you want to add.
OR dial 9 and an outside number. Wait for called party to answer
When the called party answers, press the “Add” softkey or “CONF” button twice.
5. Repeat steps 2~4 above to add more parties
The maximum number of parties is 3 outside and 3 inside calls including yourself.
Changing Voice/Ring on Intercom calls
To select Voice Announce on intercom calls
Press “Speaker” button and dial 721, “Voice Announce” will appear on display. Press speaker button again
To select Ring on intercom calls
Press “Speaker” button and dial 723, “Signaling” will appear on the display. Press speaker button again
To change your ringtone
Press Enter button, scroll to Phone Stetting, Press Enter, Scroll to Ring Options, press enter, Scroll to Ring Tones,
Select either Internal calls or External calls, scroll to desired ring and press Enter. Press Exit button when done.

NEC SV9100 Specifications

General

Unified Messaging	Yes
VoIP Support	Yes
SIP Support	Yes
VoIP Protocols	SIP, H.323
Mobility	Yes
Type	IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C (32°F to 104°F)
Humidity	10% to 90% (non-condensing)
System Type	Hybrid (Supports Analog, Digital, and IP)