NEC SV9100 - Active Call Interface and Management; Managing Ringing Calls During an Active Call

NEC SV9100 Communication System
34 SV9100 – InUC User Guide
2. When answered, the call area displays the active call with duration, caller ID (if available) and function
buttons for Hold, Conference, Transfer, Hangup and DTMF Digit pad.
Figure 55: Call Area
3. If on a call and a trunk call rings in, an indication is displayed in the upper right corner of the InUC Web
Client window.
4. Click on the displayed indication (refer to Figure 55 Call Indication) to show a drop down of the ringing
call.
Figure 56: Call Indication