NEC SV9100 Communication System
6 SV9100 – InUC User Guide
Logging into the InUC Web Client
To access the InUC Web Client, launch a web browser and go to http://<SV9100 IP Address>/uc/ (Enter the IP
address of your SV9100 system in place of <SV9100 IP Address>). For example: http://172.16.0.10/uc/.
NOTE: You must include the / at the end of the uc or the Client login page will not load.
To log in:
1. When the Login screen is displayed, enter your ID and Password.
NOTE: The ID and Password are assigned by your System Administrator.
Figure 1: InUC Login Screen
2. Click the Login button.
Once login is successful, the Home page is displayed. When logging in for the first time, the home page
will only show the logged in user profile.
Figure 2: InUC – Home Page Figure 2a: InUC – Home Page with Call Control Bar (Top)
To Next Page
Loading...
