NEC SV9100 - Blind Call Transfer; Initiating a Blind Transfer

NEC SV9100 Communication System
SV9100 - InUC User Guide 37
Transferring a Call (Blind)
1. To Blind Transfer a call to another user, click on the Transfer icon.
Figure 61: Transfer Button
The call is placed on hold and a secondary intercom dial tone is heard.
2. The Dial Pad window is displayed. Enter the transfer destination and click on the Transfer button. If the
transfer destination is an outside number, check the trunk access box, enter the destination number, and
then click the Transfer button.
Figure 62: Dial Pad Screen