NEC UM280X - Page 93

To Next Page

To Previous Page

5. Using On-Screen Menu

AdjustingHorizontal/VerticalPosition[HORIZONTAL/VERTICAL]

Adjuststheimagelocationhorizontallyandvertically.

NOTE:The[HORIZONTAL]and[VERTICAL]itemsarenotavailableforVIDEO,S-VIDEO,HDMI,VIEWER,NETWORK,andUSB

DISPLAY.

- Animagecanbedistortedduringtheadjustmentof[CLOCK]and[PHASE].Thisisnotmalfunction.

- Theadjustmentsfor[CLOCK],[PHASE],[HORIZONTAL],and[VERTICAL]willbestoredinmemoryforthe

currentsignal.Thenexttimeyouprojectthesignalwiththesameresolution,horizontalandverticalfrequency,

itsadjustmentswillbecalledupandapplied.

 Todeleteadjustmentsstoredinmemory,fromthemenu,youselect[RESET]→[CURRENTSIGNAL]or[ALL

DATA]andresettheadjustments.

SelectingOverscanPercentage[OVERSCAN]

Selectoverscanpercentage(0%,5%and10%)forsignal.

Projected image

Overscaned by 10%

NOTE:

• The[0[%]]cannotbeselectedwhenVIDEOandS-VIDEOsignalsareused.

• The[OVERSCAN]itemisnotavailable:

 •when[NATIVE]isselectedfor[ASPECTRATIO].

 •when[VIEWER],[NETWORK],or[USBDISPLAY]isselectedfor[SOURCE]

Other manuals for NEC UM280X