UNIVERGE SV8100 Issue 1.0
System Maintenance Manual 2 - 15
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Leave one CD-4LCA /CD-8LCA , one CD-8DLCA and
CD-CP00-US installed. Go to Flowchart A1.
Problem
solved?
Problem
solved?
Problem
solved?
No Dial Tone Access on SLT
E1
Check PRG 10-03 for
CD-4LCA/CD-8LCA
assignments.
Assignment
correct?
Assign Again.
End.
Replace SLT, and test.
Replace SLT, and test.
Both CO
Internal
Good
Go to Flowchart C3.
Go to Flowchart C3.
No CO
or internal
dial tone?
Check CO line dial tone on
a Multiline Terminal.
Bad
Repair SLT.
1. Reset CD-4LCA /CD-8LCA ) and test.
2. Replace CD-4LCA (SLI 4)/CD-8LCA, and test.
3. Perform Second Initialization, and test.
Problem
solved?
Done.
To Next Page
Loading...
