UNIVERGE SV8100 Issue 1.0
System Maintenance Manual 3 - 19
R ip route
R ip dsp info
The example above shows that there is a 16VoIPU in slot 16, and that DSP1 is
in use by an extension, and DSP2 is in use by SV8100Net IP. This command
can be useful to determine how many VoIPU resources (channels) are being
used.
Network DestAddr Netmask Gateway Next Hop Metric
127.000.000.000 255.000.000.000 127.000.000.001 000.000.000.000 1
224.000.000.001 255.255.255.255 127.000.000.001 000.000.000.000 1
192.168.001.000 255.255.255.000 192.168.001.020 000.000.000.000 1
192.168.001.020 255.255.255.255 127.000.000.001 000.000.000.000 1
Default Route: 192.168.001.254
VoIPU Dsp Resource Management Table)
#Slot:01 Busy:- -------
#Slot:02 Busy:- -------
#Slot:03 Busy:- -------
#Slot:04 Busy:- -------
#Slot:05 Busy:- -------
#Slot:06 Busy:- -------
#Slot:07 Busy:- -------
#Slot:08 Busy:- -------
#Slot:09 Busy:- -------
#Slot:10 Busy:- -------
#Slot:11 Busy:- -------
#Slot:12 Busy:- -------
#Slot:13 Busy:- -------
#Slot:14 Busy:- -------
#Slot:15 Busy:- -------
#Slot:16 Busy:02 16VoIPU
[01-04] 0505 e001 ---- ----
[05-08] ---- ---- ---- ----
[09-12] ---- ---- ---- ----
[13-16] ---- ---- ---- ----
VoIPU Active Flag Table)
12345678901234567890123456789012
xxxxxxxxxxxxxxxoxxxxxxxxxxxxxxxx
05xx IP Keytelephone (DtermIP)
DCxx IP Trunk (H.323)
E0xx SV8100Net IP
To Next Page
Loading...
