5
1.
Holding Calls
EXCLUSIVE HOLD
With a call in progress:
Press Hookswitch.
Note 1: Replacing the handset when a call is on hold will
cause the held call to immediately ring your
station.
Note 2: Once a call is placed on hold, the telephone can be
used to place another internal or outside call or
access a feature (i.e, Call Pickup). Replace
handset to return to the original party.
Transferring Calls
With a call in progress:
1. Press Hookswitch.
2. Dial station number.
3. Announce call (optional).
4. Replace handset.
Note 1: If the called station is busy, replacing handset will
initiate a camp-on. An unanswered camp-on or
ring transferred call will recall to your telephone
after a preprogrammed time interval.
Note 2: To return to the original party, press Hookswitch
twice.
Note 3: To transfer a call directly to a personal voice
mailbox, dial 2 after dialing the station number.
3/4 Party Conference
With an internal call in progress:
1. Press Hookswitch.
2. Place second call (internal or outside).
3. Announce conference.
4. Press Hookswitch to establish conference.
Note 1: Repeat above procedure to add a fourth party.
Note 2: No more than 1 outside party can participate in a
conference.
Note 3: A conference may be placed on Hold by pressing
Hookswitch. Replacing the handset will cause the
conference call to ring your telephone.
To Next Page
Loading...
