21
1.
Group Call by Pilot Number Dialing
This feature allows a station user (Multiline Terminal /
Single Line Telephone / PS) or a trunk party to page a
group of stations simultaneously by dialing a pilot
number. The maximum of 32 stations can be assigned
to a paging group, and the paging group is associated
with the pilot number. After one of the paged stations
answers, the paging becomes a 2-way calling between
the calling party and the first answered station and
automatically stops paging other stations.
To page a group of stations:
1. Go off-hook and receive a dial tone.
2. Dial the pilot number for a desired paging group
and receive ringback tone.
To answer the paging:
1. When the paging call terminates, the called
stations receive ringing.
2. Answer the ringing of paging from the calling
party.
3. Paging stops after one of paged stations answer.
Call Hold
This feature permits a user to Hold a call in progress by
sending a hookflash and dialing the Call Hold feature
access code, or by pressing the Call Hold key. This line
can then be used for originating another call or
returning to a previously held call.
To Hold a call in progress:
1. Press the FLASH key (or momentarily press the
hookswitch) and receive special dial tone.
2. Dial the Call Hold feature access code and
receive dial tone.
3. The call in progress is held and the station may
make a new call.
To release a call and return to the original call:
1. Hang up to release the call in progress.
2. The original call rings back to station.
3. Lift the handset and continue with the original call.
To Next Page
Loading...
