NEC V230X - Menu Descriptions & Functions [INFO.]

76
5. Using On-Screen Menu
7 Menu Descriptions & Functions [INFO.]
Displaysthestatusofthecurrentsignalandlampusage.Thisitemhasthreepages(fourpagesonV300X/V260X).
The information included is as follows:
TIP:PressingtheHELPbuttonontheremotecontrolwillshowthe[INFO.]menuitems.
[USAGE TIME]
[LAMPLIFEREMAINING](%)*
[LAMPHOURSUSED](H)
[TOTALCARBONSAVINGS](kg-CO2)
[TOTALCOSTSAVINGS]
* The progress indicator shows the percentage of remaining bulb life.
The value informs you of the amount of lamp usage. When the remaining lamp time reaches 0, the LAMP LIFE
REMAINING bar indicator changes from 0% to 100 Hours and starts counting down.
If the remaining lamp time reaches 0 hours, the projector will not turn on regardless of whether the ECO MODE
is set to OFF or ON.
• Themessagetotheeffectthatthelampshouldbereplacedwillbedisplayedforoneminutewhentheprojector
is turned on and when the POWER button on the projector or the remote control is pressed.
To dismiss this message, press any button on the projector or the remote control.
Lamplife(H)
ReplacementlampECO MODE
OFF ON
3500 5000
NP13LP(V260X/V230X/V260/V230)
3000 5000
NP18LP(V300X)
• [TOTALCARBONSAVINGS]
This displays the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving
calculationisbasedontheOECD(2008Edition).