116
Using Software Keyboard to enter an encryption key
1. Select one of Key 1, Key 2, Key 3 and Key 4 and press the ENTER button.
The software keyboard will be displayed.
2. Use the SELECT
왖왔왗
or
왘
button to select one key and press the ENTER button.
3. After finishing entering the WEP key, use the SELECT
왖왔왗
or
왘
button to select [OK] and press the
ENTER button.
The software keyboard will disappear.
Domain
Host Name ............ Type in a hostname. Up to 60 alphanumeric characters can be used.
Domain Name ....... Type in domain name of the network connected to the projector. Up to 60 alphanumeric characters can be
used.
6. Using On-Screen Menu
To Next Page
Loading...
