68
Operations on the projector – Connecting to the computer
1. Make the LAN settings on the projector.
Make the LAN settings at [Setup]
→
[Installation]
→
[LAN Mode] in the menu. (See page 111)
2. Connect a commercially available USB mouse to the projector. (See page 53)
3. Click anywhere on the screen with the USB mouse.
The menu appears.
4. Click [Source], then click “LAN”.
The help message is displayed.
The message is displayed only when a password for Desktop Control Utility 1.0 is not assigned.
5. Follow the message to press the MENU button on the projector cabinet or the remote control.
The connections bar appears at the bottom left of the screen.
6. Click the password input icon .
7. Click “Entry”.
The password input window appears.
8. Click .
The character input window appears. (See page 148.)
4. Convenient Features
To Next Page
Loading...
