Quick start
The following chart summarises the connection process for the
MultiSync XP17/XP21 monitor.
For more details please turn to the following pages if you are connecting
to an IBM compatible, Macintosh or compatible or other system.
Connect the power cord of the moni-
tor to the power outlet and to the mo-
nitor itself.
If necessary, use the OSM controls
for personal preference of the image.
Turn the monitor and computer on.
See the Trouble Shooting section
Call your NEC-Dealer
Is the image correct?
No
Yes
Problem solved?
Yes
No
Is the BNC Input being used?
Yes
No
Set the BNC/D-SUB switch to the
up (raised) position
Set the BNC/D-SUB switch to
the down (push in) position
Attach the Multicable or BNC Cable to
the to the video board. first and then to
the monitor
Enjoy your monitor.
Is your computer a Macintosh
computer?
Yes
No
Is your computer a Powerbook, LC,
AV, PowerMac or Quadra 605?
Yes
No
Set the Sync. Switch to the ON
position.
Set the Sync. Switch to the OFF
position.
Quick start E-9
To Next Page
Loading...
Need help?
General