your screen or switch to a lower resolution, such as 640x480, to increase
the speed of your system or to increase the number of available colours.
Please see the instructions included with the software for installation
and function instructions.
The Intelligent Power Manager System (IPM) follows the United
States government’s EPA and Europe’s Nutek guidelines. The
IPM-System increases the monitor’s life and saves energy and costs by
powering down when not in use. The Nutek specification 803299
requires automatic power down to less than 30 watts in the suspend and
8 watts in the off mode. When in the maximum power-down mode, the
MultiSync XP-series monitors will consume approximately 10% of the
total power drawn under normal operation. This innovation adds up to
90% energy savings, longer monitor life, environmental protection,
reduced emissions, and reduced heating and air-conditioning costs of the
work environment.
Note: This utility can only be enabled if your video supports this feature
according to DPMS of VESA or using Power Manager software.
The OSM (On Screen Manager) makes the MultiSync monitor’s Digital
Control System easier to use. A touch of the up front controls turns on
OSM. You’ll find it easy to navigate through the menu that appears, and
icons show you how the controls works.
The enhanced Color Control allows you to adjust the colours on your
screen to exactly what you want, thus eliminating misrepresentations
and frustration. The Colorific Color Enhancement System helps you
match what is on your screen to your printer output by incorporating
Kodaks Color Management System in Microsoft Windows or Apple’s
ColorSync Utility on the Macintosh to translate your choices to
matching printed material.
The OptiClear surface of the XP-series CRT dramatically reduces the
reflection of ambient illumination and glare without sacrificing the
focus level, clarity or brightness.
Introduction E-3
To Next Page
Loading...
Need help?
General