9
To snap off
To Snap On and Snap Off the Presser Foot
Turn the power switch off.
Turn the handwheel toward you to
raise the needle to its highest
position. Raise the presser foot.
To snap on
When attaching the presser foot, set
the pressure regulator button at the
depressed position to the bottom.
Place the presser foot so the pin on
the foot lies just under the groove of
the foot holder. Lower the foot holder
to lock the foot in place.
Press the lever on the back of the
foot holder.
The presser foot will drop off.
To Next Page
Loading...
