28
Machine setting
Rolled Hem
Make a double 0.25 cm (1/8”) fold
approximately 8 cm ‘3”) in length
Lower the needle into the fabric at
the point where sewing is to begin,
then lower the hemmer foot.
Sew 3 or 4 stitches while holding the
needle and bobbin threads.
Lower the needle into the fabric and
lift the hemmer foot. Insert the folded
portion of the fabric into the curl of
the hemmer foot.
Trim about 0.7 cm (1/4”) from
corners as illustrated, to reduce bulk.
Lower the hemmer foot, then sew by
lifting up the edge of the fabric to
keep it feeding smoothly and evenly.
To Next Page
Loading...
