Necta KORO Fresh Brew - FILLER MENU FUNCTIONS; Setting Individual Prices

© by N&W GLOBAL VENDING SpA
18
0603 265 - 00
SELECTION PRICES
With this function it is possible to read the boiler tempera-
ture directly in °C.
The symbol “ ” indicates that the boiler heating element is
not heating.
The symbol “ ” indicates that the boiler heating element is
heating.
TEST DISPENSING
For complete or partial dispensing tests (water, powder,
only and without accessories) each button (or combination
of buttons according to the model) is assigned a selection
(see the dose selection table).
FILL>
Tubes control
FILL>
Fill tubes
Credit:#####
This function is used for changing the sales price for each
single selection and for each time band that may be set.
CHANGE TUBES CONTROL
By accessing the “Tube control” function the change tubes
can be filled or released manually.
Confirm refilling, and the display will indicate
“Credit: ——” which is the value of money available in
change the tubes; insert the desired coin into the validator
and the display will indicate the value of money available in
the change tubes.
When confirming releasing, it will be possible to decide
which tube to release. Each time the confirm button “ ” is
pressed, a coin is ejected from the active tube.
FILL>
Boiler temperature
Boiler temperature
T. = ##,# °C
EVADTS TRANSFER
When activating this function, the machine awaits the
connection with a device to acquire the EVADTS statistics.
FILL>
EVADTS
FILL>
Connection
FILLER MENU MASKING
The functions described in this chapter can be inhibited
selectively from the “technician menu”.
FILL>
PRICES
PRICES
Selection #
Selection #
Time band #
Time band #
Price # #. # #
FILL>
Release tubes
Credit:#####
Release tubes
Tube A ÷ X
DISPLAYING THE TEMPERATURE
FILL>
TEST
FILL>
Complete selection
FILL>
Water only
FILL>
Powder only