Need help?Do you have a question about the Nedap 9215689 and is the answer not in the manual?
General| Brand | Nedap |
|---|---|
| Model | 9215689 |
| Category | Rfid Systems |
| Language | English |
Details the TRANSIT Ultimate as a long-range RFID reader for automatic vehicle identification.
Highlights key features like encrypted tag authentication and AES 128-bit encryption.
Outlines essential safety measures to be observed during normal use, service, and repair.
Provides guidance on reader positioning, read range, and beam width for installation.
Details the dimensions and mounting bracket information for installing the reader.
Explains the procedure for installing the optional Security Key Pack (SAM) for encrypted authentication.
Describes how to install modular communication interface boards for extended connectivity.
Illustrates the wiring connections between the TRANSIT Ultimate and the OSDP Interface Board.
Details the RS485-OSDP wiring for point-to-point and multi-drop communication.
Guides on configuring the TRANSIT Ultimate reader for OSDP installations using specific software.
Provides a general overview of the various input and output connections available on the reader.
Explains how to connect the TRANSIT Ultimate to AC mains or a 24 VDC power supply.
Covers the USB interface for service and installation purposes and driver installation.
Details the configuration and usage of digital inputs and outputs like relay and tamper switch.
Describes optional connections for proximity antennas and Nedap antenna modulation.
Explains how to operate the reader in ULTIMATE-mode or NORMAL-mode (TAB bypass).
Details how to enable or disable the internal range beeper and its indication.
Guides on selecting serial communication protocol via dip-switches for PIC or TAB communication.
Describes how to select operating frequency channels to avoid interference.
Explains how to control the read range using the embedded squelch function and potentiometer.
Details the microwave time-share mode for periodic operation to reduce interference.
Lists and describes the LEDs on the main board indicating the reader's status.
Lists and describes the LEDs on the TAB board for troubleshooting Ultimate-mode features.
To Next Page
