Nedap PowerRouter PR30S - 4 Unpacking and Inspection

To Next Page

To Previous Page

4 Unpacking and inspection

This chapter is intended for installers

All PowerRouter units are thoroughly tested and inspected before they are packed and

transported. Although they are shipped in sturdy, recyclable packaging, damage may

however still occur during transportation.

It is important to carefully inspect the shipping packaging prior to beginning the

installation. If any external damage to the packaging makes you suspect the

PowerRouter itself could be damaged, or if you nd that the PowerRouter is damaged

after unpacking it, report the damage immediately to your installer and to the

transportation company that delivered the PowerRouter.

If it becomes necessary to return the PowerRouter, please use the original packaging

in which it was delivered.

The PowerRouter weights 18 kg including packaging. To avoid injury,

ensure the use of proper lifting techniques and secure the help of a second

person to assist in the unpacking and installation of the PowerRouter.

Figure 3 Unpacking

PowerRouter box content:

1 PowerRouter PR50S

1 PowerRouter PR50S with PV-switch

1 PowerRouter PR37S

1 PowerRouter PR37S with PV-switch

1 PowerRouter PR30S

1 PowerRouter PR30S with PV-switch

1 wall-mounting bracket

1 Pouch containing:

1 Installation manual

1 Installation sheet

1 Drill template

part no. 9560688

part no. 9560947

part no. 9560874

part no. 9561145

part no. 9561161

part no. 9561188

part no. 5749034

part no. 5277337

part no. 5277329

part no. 5555477

Other manuals for Nedap PowerRouter PR30S