Nedap SmartFlow / Installation manual
Version 00.001 / September 2020 / EN
5
Dairy Farming
2 SmartFlow overview
2.1 SmartFlow introduction
The SmartFlow measures and registers the milk yield and flow rate of individual cows during each milking. The
mechanical geometry and electronic recording principle of the Nedap SmartFlow are designed for a continuous
and optimally free milk and air flow. No flow obstruction or interruption occurs that could cause a vacuum drop,
vacuum fluctuation or rough treatment of the milk. As a result, cows are milked more gently and completely and
udder health improves. It also leads to higher milk quality with less free fatty acids.
The SmartFlow is completely wireless. The Float inside the device and the Velos Process Unit (VPU) form the
intelligent brains and the heart of the system. They combine advanced technologies that make power supply, the
measuring principle and data communication completely wireless. The Float is equipped with state-of-the-art
technologies for the most accurate and reliable measurements. It has smart functionalities on board such as a
data-memory and a control system that monitors whether the device is correctly installed, functions properly,
cleans properly and has a data connection.
Data communication between the SmartFlow and Nedap's dairy management system takes place via Ultra
High Frequency (UHF) communication. All data that is measured and recorded by the Nedap SmartFlow is
sent real-time and wirelessly, collected by an antenna and processed by the VPU. Information and insights are
immediately available via the web-interface (on desktop, tablet or smartphone) and/or via the display of the
milking parlor control unit. Automated actions, such as automatic cluster take-off, are executed immediately as
needed.
Figure1:SmartFlow system overview
1. SmartFlow with Float 4. PC or smartphone with performance insights in Velos
2. V-box with VP4102 UHF reader and antenna 5. UHF connection (CAN or Ethernet)
3. V-box with VP8002 VPU 6. Ethernet connection
To Next Page
Loading...
Need help?
General
