Nedap SmartFlow - User Manual

Other manuals for Nedap SmartFlow

Questions and Answers

brendanmillerAug 9, 2025

Why is there no milk yield measurement with my Nedap Farm Equipment?

T
Teresa EvansAug 9, 2025
If you're not getting any milk yield measurements, several factors could be at play. It might be that the SmartFlow milk meter is clogged, in which case you should clean the inside of the SmartFlow. Alternatively, the float could be broken or not sending data, requiring you to replace the float. Another potential cause is a torn seal on the SmartFlow cleaning valve; replace it with the seal from the Nedap replacement kit.

Benjamin BrownAug 25, 2025

What to do if milk yield measurement deviates on my Nedap SmartFlow Farm Equipment?

A
Aaron VasquezAug 25, 2025
If the milk yield measurement is off, the SmartFlow milk meter might be skewed; level the SmartFlow. Also, the SmartFlow milk meter could be clogged, so clean the inside of the SmartFlow. Finally, a torn seal of the SmartFlow cleaning valve can cause deviations; replace the seal with the one from the Nedap replacement kit.

General

Category	Farm Equipment
Connectivity	Ethernet, WiFi (optional)
Technology	RFID
Data Collection	animal behavior
Sorting	Automated sorting based on predefined criteria
Reporting	Real-time data and reports on animal performance
Compatibility	farm management software
Power Supply	Mains power (230V/110V)
Data Storage	Cloud and local storage options