Nedap SmartFlow User Manual

Nedap SmartFlow / Installation manual
Version 01.001 / 2021 / EN
13
Dairy Farming
The SmartFlow can be mounted in two configurations: The milk outlet is positioned either on the right side or
the left side of the Smartflow. The mounting procedure only shows illustrations of the right side configuration,
but is applicable for the left side configuration as well.
Figure3:Right and left side configuration of the milk outlet on the SmarttFlow
3.4 Unpack the SmartFlow components
1. Check if all parts and components are present:
Item
SmartFlow milk meters
SmartFlow floats
VP8002 VPU or VP8002 VPU set
VP4102 reader or VP4102 reader set
VP2001 power supply (for VP8002 VPU)
Indoor antenna 922 MHz
Antenna mounting bracket (optional)
2. Check the content of the delivery for visible damage.
3. Report any missing or damaged part or component immediately to your supplier.
3.5 Place the SmartFlow components
Place the SmartFlow components on the locations indicated in the Installation Plan.
3.6 Mount the components

Nedap SmartFlow Specifications

General

Brand	Nedap
Model	SmartFlow
Category	Farm Equipment
Language	English