Nedap SmartFlow / Installation manual
Version 00.001 / September 2020 / EN
7
Dairy Farming
a. Milking mode.
When the valve is in the milking position, the milk cannot flow away from the right side of the valve.
The milk level in the main volume rises, and the Float starts floating on the milk flow, and measures the
amount of milk in the SmartFlow.
b. Cleaning mode.
When the valve is in the cleaning position, only a bit of the liquid can flow through the flow column. This
will completely fill the rest of the SmartFlow with cleaning liquid, which ensures proper cleaning of the
SmartFlow.
To Next Page
Loading...
Need help?
General
