InTouch, model VP5001 / User Manual
Version 03.000 / July 2022 / EN
17
Dairy Farming
9 Appendix
9.1 InTouch menu overview
1. To open the InTouch menu, press the Cow separation button and Main button simultaneously for a LONG
period.
2. The Main button can be used to change the settings in the menu:
a. Push the button for a SHORT period to go through the menu options.
b. Push the button for a MEDIUM period to change a menu item.
• If the Main button is not pushed again within approximately 20 seconds, the display goes blank.
• To leave the menu at any point, push and hold down the Main button until the display goes blank.
First level Second level Settings Description
System procedures menu
Display serial number
Display application version
Address menu
Display address
Set address
Internal test menu
Display/reset errors
Enable output 1
Enable output 2
Enable output 3
Display input 1 state
Display input 2 state
Enable pulsator 1
Enable pulsator 2
Testing active pulsator connection
mode
Display test. Enable all display
segments and flash all LEDs
To Next Page
Loading...
