InTouch, model VP5001 / User Manual
Version 03.000 / July 2022 / EN
7
Dairy Farming
3 First use
The first time the Nedap InTouch units are used after installation, the following tasks must be completed by the
installer (in cooperation with the farmer):
1. Add animals to Velos using the Add animal option on the Farm or Quick entry window:
a. Couple a responder number to each animal for animal identification.
b. Fill in the right calendar data for each animal.
c. Add milk separation rules (if applicable).
d. Add cow separation rules (if applicable).
2. Go to Settings > Milking > Attentions to select the requirements for a milking attention. Click Submit to
save the settings.
3. Go to Settings > Milking > Milking times to select for each production group the start and end times of each
milking session. Click Submit to save the settings.
For detailed installation instructions see the InTouch Installation Manual, which can be obtained from your
dealer or on our Business portal: https://www.portal.nedap-livestockmanagement.com.
To Next Page
Loading...
