InTouch, model VP5001 / User Manual
Version 03.000 / July 2022 / EN
13
Dairy Farming
5 Maintenance
Caution
• Always turn off the mains power supply when working on the electrical installation.
• Always turn off the air pressure supply when working on the pneumatic installation (if applicable).
• Never power wash the electrical components of the installation. Only clean the InTouch by power
washing.
• Do not use corrosive and/or toxic cleaning agents.
• Any damage and/or accelerated wear due to non-compliance or complete lack of maintenance is not
covered by the manufacturer's warranty.
• Any damage caused by power washing or any other form of high pressure washing is not covered by the
manufacturer's warranty.
5.1 Maintenance scheme
Regularly clean the outside of the InTouch with a soft cloth and a non-aggressive cleaning agent. The InTouch
control panel must be cleaned at least once per two weeks.
It is allowed to power wash the outside of the InTouch.
To Next Page
Loading...
