EasyManuals Logo

NEFF B48FT78N2 User Manual

NEFF B48FT78N2
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
en Steam
16
8.
Press ⁠ to start the sous-vide cooking process.
→"Pausing operation", Page13
→"Cancelling operation", Page13
a Once the duration has elapsed, an audible signal
sounds and the appliance stops heating.
→"Switching off the appliance", Page13
9.
Press any button to end the audible signal.
10.
WARNING‒Risk of scalding!
Hot water collects on the vacuum-sealing bag dur-
ing cooking.
Use an oven cloth to carefully lift the vacuum-
sealing bag so that the hot water runs off into the
universal pan or the cooking container.
Use the oven cloth to carefully remove the va-
cuum-sealing bag.
Use an oven cloth to carefully remove the vacuum-
sealing bag.
11.
Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page17
Defrost
Use the "Defrost" function to defrost deep-frozen and
frozen products.
Configuring the Defrost heating function
1.
Fill the water tank.
→"Filling the water tank", Page14
2.
Press ⁠ to switch the appliance on.
3.
Swipe left or right to set "Defrost" ⁠.
4.
Press the temperature to select it.
5.
Swipe left or right to select the required temperat-
ure.
6.
Press ⁠ to save your settings.
7.
Press ⁠ to select the defrosting time.
8.
Swipe left or right to select the required defrosting
time.
9.
Press ⁠ to save your settings.
10.
Press ⁠ to start the defrosting process.
→"Pausing operation", Page13
→"Cancelling operation", Page13
a If the water tank runs dry during the defrosting pro-
cess, defrosting will be paused.
→"Refilling the water tank", Page15
a Once the duration has elapsed, an audible signal
will sound and the appliance will stop heating.
→"Switching off the appliance", Page13
11.
Press any button to end the audible signal.
12.
Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page17
Reheat
The "Reheat" function is used to warm up food that has
already been cooked, or bread and pastries from the
day before, without affecting its quality.
Configuring the Reheat heating function
Requirement:The cooking compartment must have
cooled down completely (to room temperature).
1.
Fill the water tank.
→"Filling the water tank", Page14
2.
Press ⁠ to switch the appliance on.
3.
Swipe left or right to set "Reheat" ⁠.
4.
Press the temperature to select it.
5.
Swipe left or right to select the required temperat-
ure.
6.
Press ⁠ to save your settings.
7.
Press ⁠ to select the reheating time.
8.
Swipe left or right to select the required reheating
time.
9.
Press ⁠ to save your settings.
10.
Press ⁠ to start the reheating process.
→"Pausing operation", Page13
→"Cancelling operation", Page13
a If the water tank runs dry during the reheating pro-
cess, reheating will be paused.
→"Refilling the water tank", Page15
a Once the duration has elapsed, an audible signal
will sound and the appliance will stop heating.
→"Switching off the appliance", Page13
11.
Press any button to end the audible signal.
12.
Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page17
8.4 Steam-assisted cooking
When you cook with steam assistance, the appliance
introduces steam into the cooking compartment at vari-
ous intervals. This gives your food a crispy crust and a
shiny surface. Meat stays juicy, tender and only under-
goes a minimum reduction in volume.
Heating functions compatible with steam
assistance
You can switch on steam assistance for the following
heating functions:
¡ "CircoTherm hot air" ⁠
¡ "Top/bottom heating" ⁠
¡ "Circo-roasting" ⁠
¡ "Bread-baking setting" ⁠
¡ "Keep warm" ⁠
Switching on steam assistance
1.
Fill the water tank.
→"Filling the water tank", Page14
2.
Press ⁠ to switch the appliance on.
3.
Set a suitable heating function.
→"Heating functions compatible with steam assist-
ance", Page16
4.
Set the required temperature.
5.
Use the ⁠button to switch on steam assistance.
6.
Swipe left or right to select the required steam
intensity ⁠:
Low
Medium
High
7.
Press ⁠ to save your settings.
8.
Press ⁠ to start steam-assisted heating.
a If the water tank runs dry during steam-assisted
heating, "Fill water tank" will appear on the display.
The appliance will continue to heat but without in-
jecting steam into the cooking compartment.
→"Refilling the water tank", Page15
Cancelling steam-assisted cooking
1.
Press ⁠.
2.
Press the bottom row featuring the steam intensity.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEFF B48FT78N2 and is the answer not in the manual?

NEFF B48FT78N2 Specifications

General IconGeneral
BrandNEFF
ModelB48FT78N2
CategoryOven
LanguageEnglish

Related product manuals