ImportAppliances.com
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
en Rails
26
pRails
Rails
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
shelves and clean them.
Detaching and refitting the rails
:Warning – Risk of burns!
The rails become very hot. Never touch the hot rails.
Always allow the appliance to cool down. Keep children
away from the appliance.
Detaching the rails
1. Pull out the pull-out forwards.
2. Push the front rail forwards and up (fig. !) and
detach it (fig. ").
3. Then swing the entire rail outwards ‚ and detach it
at the rear ƒ (fig. #).
Clean the rails with cleaning agent and a sponge. For
stubborn deposits of dirt, use a brush.
Inserting the holders
If the holders fall out when you remove the rails, these
must be re-inserted.
1. The holders at the front differ from those at the rear
(fig. !).
2. Use the hook to mount the front holder at the top
into the round hole ‚, set it at a slight incline, attach
it at the bottom, and straighten it ƒ (fig. ").
3. Use the hook to attach the rear holder into the upper
hole
‚ and push it into the lower hole ƒ (fig. #).
Attaching the rails
When hanging the rails, ensure that the pull-out is at the
bottom.
The rails only fit on the right or the left side. The pull-out
rails must pull out forwards.
1. Hold the rear of the frame at an angle and mount it
at the top and bottom ‚ (fig. !).
2. Pull the rail forwards (fig. ").
2
1
E
D
D
E
21
D
E
2
D
D
1
To Next Page
Loading...
Need help?
General