en Familiarising yourself with your appliance
6
5 Familiarising yourself with your appliance
5.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Switching noise reduction on or off
Switching the AirFresh function on or off
Decreasing the fan setting
Increasing the fan setting
Switching intensive modes on or off
Switching the fan run-on on or off
Switching the lighting on or off
Setting the brightness
5.2 Display
You can see the current setting values in the display.
Noise reduction function
- Fan settings
Fan run-on
AirFresh function
6 Basic operation
6.1 Switching on the appliance
▶
Press .
a The appliance starts at fan setting2.
6.2 Switching off the appliance
▶
Press .
6.3 Selecting a fan setting
▶
Press or .
6.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
1.
To switch on intensive mode 2, press .
a appears on the display.
2.
To switch on intensive mode 1, press again.
a appears on the display.
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
6.5 Switching off intensive mode
▶
Press .
6.6 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
▶
Press
a The fan run-on starts at fan setting1.
a The appliance switches off automatically after ap-
prox. 10 minutes.
6.7 Switching off the fan run-on
▶
Press
6.8 Switching on the AirFresh function
The AirFresh function switches on the ventilation sys-
tem for approx.five minutes per hour at fan setting1.
▶
Press .
a appears on the display.
6.9 Switching on the NoiseReduction
function
The noise reduction function reduces the fan noise.
The function is possible in all fan settings, except in fan
setting .
▶
Press .
a The NoiseReduction function remains active even
after the appliance is switched off.
To Next Page
Loading...
Need help?
General
