14 Nektar Panorama T4 & T6 User Guide www.nektartech.com
Internal Mode Controls & Assignments
Internal mode can be used alongside Nektar DAW Integration and Nektarine. Press the [Internal] button to make sure the mode is
selected (this is the default mode on power-up). In Internal mode, controls can be assigned to MIDI messages and Preset and Pad Maps
can be configured, saved and loaded. There is also a collection of performance controls that are stored outside of Presets and Pad Maps.
Performance Controls
Performance controls are used for real-time performance manipulation, navigation and transport. Assignments are stored over power
cycling but they are not part of a stored Preset or Pad Map.
Performance controls include:
• Pitch bend & Modulation wheels
• AfterTouch
• Foot Switch input
• Expression Pedal input
• Navigation buttons [Track-], [Track+], [Browse], [View]
• An additional 4 navigation button assignments can be accessed by pressing [Shift]+[one of the navigation buttons]
• 6 transport buttons
In total, 19 global control assignments are stored over power cycling.
As Presets or Pad Maps are loaded or adjusted, performance controls remain unchanged.
Presets
Panorama T4/T6 has 10 user configurable presets and each preset stores settings for the following controls:
• Faders (9)
• LED buttons (8)
• Encoders (8)
There are two options to load a preset:
• Press the [Setup] button and select ‘Load‘ using [E1/Data]. Next press [Enter] and select the preset you want to load using [E1/Data].
Press [Enter] to load.
• Press and hold a mode button, such as [Internal] and select a preset using [E1/Data]. Release [Internal]. The preset is loaded instantly
upon release.
See page 15 for more information about mode buttons.
To Next Page
Loading...
Need help?
General
