4 Nektar SE25 & SE49 DAW Integration User Guide www.nektartech.com
COMPATIBILITY
Mixcraft 7 or higher.
INSTALLATION & SETUP
• Locate the Nektar SE25/49 file included with this package .
• Place the file in this location on your Windows PC (note you can copy the path in to File Explore): c:\ProgramData\Acoustica\Mixcraft\
control-surfaces.
• Make sure your SE25/SE49 is connected and powered on.
• Launch Mixcraft and check that the SE25/SE49 control surface appears the following Mixcraft Menu: Mix/MIDI Control Surface.
Reaper
COMPATIBILITY
Reaper 4.59 or higher.
Windows (Vista, 7, 8, 10 or higher) or Mac OS X 10.6 or higher.
INSTALLATION & SETUP
• If you have just completed a fresh install of Reaper, make sure to first open Reaper once and quit again, before installing the SE25/
SE49 Reaper support files.
• Locate the installer included with this package and run it.
• Plug-in your SE25/SE49 and make sure it’s switched on (if you didn’t do so already)
• Launch Reaper and go to Options/Preferences/Control Surfaces
• Click “Add”, then in the pop-up window, select your SE25/SE49 model in the “Control surface mode” list. As long as your SE25/SE49 is
connected and switched on, Reaper should automatically detect the correct ports.
• Click “OK”
• Go to Preferences/Audio/MIDI Devices next and enable Port 1 for your SE25/SE49. The mode should be “Enable+Control”. The other
SE25/SE49 ports should remain disabled.
• Click “Apply” and OK
Reason
COMPATIBILITY
Reason 5 or higher. OS: Windows (Vista, 7, 8, 10 or higher) or Mac OS X 10.6 or higher.
INSTALLATION & SETUP
• Locate the installer included with this package and run it.
• Plug-in your SE25/SE49 and make sure it’s switched on (if you didn’t do so already)
• Launch Reason and go to Edit/Preferences/Control Surfaces
• Click “Auto-detect surfaces”
• You should now see SE25/SE49 appear as a control surface In Reason.
• Close the Reason Preferences window
Mixcraft
To Next Page
Loading...
Need help?
General
