1
WARNING
Lubricants
Do NOT use Vaseline, oils, hydrocarbon lubricants or spray silicone anywhere! Petroleum base lubricants will
cause swelling of o-rings and seals. The use of other lubricants may attack plastic Noryl
®
. It is recommended
that Dow Corning
®
silicone grease be used as a lubricant for all control valves. Dow Corning
®
7 Release Com-
pound is used in the manufacture of the control valves. (Part # DOW-7)
Sealants
Pipe dope and liquid thread sealers may contain a carrier that attacks some plastic materials. It is recommended
that Teflon
®
tape be used to seal plastic Noryl
®
threaded fittings.
NORYL is a registered trademark of SABIC Innovative Plastics IP B.V.
AIO Plus Connected Series General Warnings