13
ENGLISH
Feeding documents
1. Turn the left side guide A downwards
The feed roller will be lifted.
2. Place a stack of documents between the side
guides.
3. Turn the left side guide A upwards.
3.5 Loading envelopes
Adjusting side guides
Adjust side guides C by rotating thumbwheel D, so
that the envelopes:
- fit exactly between the side guides.
- can move freely.
NOTE
If the distance between the side guides is too large,
the envelopes will twist sidewards, when transported
into the machine.
Envelope separation
1. Turn knob A counter-clockwise as far as possible.
2. Slide an envelope (with closed flap) between the rollers in the machine and turn knob
A clockwise until a slight resistance is felt when moving the envelope in and out of the
machine.
3. When the resistance is too high, turn knob A counter-clockwise, until only a slight
resistance is felt.
A
DCA
B
C
To Next Page
Loading...