5 Operating Instructions
5-8
4
Press the Enter button. When the program is successfully recalled, a short beep will sound twice.
5.4
Measuring Electrical Impedance
Electrical impedance between the electrodes can be measured. (unit: k
Ω
)
1
Press the
Ω
button.
2
The value of the measured impedance will be displayed in the Impedance window.
5.5
Executing Program (Delivering Electric Pulses)
Press the Start button in the Button Keys Selection to execute the program. Right after pressing Start
button, the electric pulses will be delivered.
During charging and pulsing, a warning beep is sounded.
When the pulsing is completed, a short beep will sound twice.
To Next Page
Loading...