Nepagene ELEPO21 - Additional Information; 6.1 Detailed Product Specifications

6 Additional Information
6-1
6
Additional Information
6.1
Specifications
If no power supply cord is provided, please select the proper power supply cord for the ELEPO21 by
referring to “Specifications” and “Certified Cord” below:
Warning
In case you use a non-approved power supply cord for Nepa Gene products,
Nepa Gene can no longer warrant the electrical safety of the device.

Poring Pulse
1 )
High Voltage Mode (automatic change)
Voltage
801 - 3,000V (increment: 1V)
Pulse Length
1,501 - 3,000V
0.1 - 5.0ms (increment: 0.1ms)
1,001 - 1,500V
0.1 - 10.0ms (increment: 0.1ms)
150.1 - 200.0V
0.1 - 50.0ms (increment: 0.1ms)
801 - 1,000V
0.1 - 99.9ms (increment: 0.1ms)
Pulse Interval
50 - 999.9ms (increment: 0.1ms)
Number of Pulses
0～9
Polarity Switching
On: With polarity switching, OFF: Without polarity switching
Capacitance
55µF
2 )
Low Voltage Mode (automatic change)
Voltage
100 - 800V (increment: 1V)
Pulse Length
751 - 800V
0.1 - 15.0ms (increment: 0.1ms)
501 - 750V
0.1 - 20.0ms (increment: 0.1ms)
301 - 500V
0.1 - 30.0ms (increment: 0.1ms)
100 - 300V
0.1 - 50.0ms (increment: 0.1ms)
Pulse Interval
50 - 999.9ms (increment: 0.1ms)
Number of Pulses
0～9
Polarity Switching
On: With polarity switching, OFF: Without polarity switching
Capacitance
995µF

Transfer Pulse
Voltage
1 - 300V (increment: 1V)
Pulse Length
101 - 300V
0.1 - 50.0ms (increment: 0.1ms)
1 - 100V
0.1 - 99.9ms (increment: 0.1ms)
Pulse Interval
50.0 - 999.9ms (increment: 0.1ms)