KE NESPACE KA Rectifier Control Unit Operation Manual English R 2016_07 V1_1
12 /21
2.2.3 Communication Cable Connection
Rectifier alarm and operation status are sent out over Debug and Ethernet ports.
Pins are assigned as follows:
Figure 2-4. Communication Connection Ports
Table 2-2. Communication Pinout Table
> Ethernet (TCP/IP)
3 – Shelf Initialization & Check Points with NESPACE modules
When installation procedures are finished, initialize the Rectifier Shelf and perform
the following functional test to check for any failures or alarms..
To Next Page
Loading...