DRX 3200 / 3210 PROFESSIONAL SATELLITE RECEIVER
4
PID
♦ Video PID
♦ Audio PID
♦ Pcr PID
♦ Txt PID
TP Search Start search after Lock LED lights (Signal exists).
Audio Tracks Shows existing audio tracks with numbers and short
language descriptions. Select the language you want.
BISS Setup
♦ Mode Mode-0: Free to air Mode-1: BISS Mode-E: (optional)
♦ SW Setup Enter 12 hex digits session word for decoding. (for Mode-1)
Use “◄”/“►” and “OK” buttons.
♦ ESW Setup Enter 16 hex digits session word for decoding. (for Mode-E)
Use “◄”/“►” and “OK” buttons.
DVB Subtitle
♦ Subtitle It is used to display DVB subtitle.
♦ Language Subtitle language that will be displayed.
Installation
♦ Audio Mode can be selected as Stereo, Left, Right and Mono.
Volume level can be selected between 0 and 31.
♦ Video Level:100 (1Vpp video level default) 95 to 105 adjustable.
Blank: Video Blank keep last screen stored or displays
blank screen if no signal. It is selected as On or Off.
System: Video system (PAL, NTSC or SECAM)
No Sig. Msg: It is selected as On or Off. When the signal is
off “No Signal” message is displayed on the screen if it is
selected as On.
♦ LNB Settings LNB type can be selected as Universal, Standard or C
Band.
Low Band: Low Band local oscillator frequency
High Band: High Band local oscillator frequency
22kHz: It is adjusted as On, Off or Auto.
DiSEqC: It is adjusted as A, B, C, D or Off.
Power: LNB power is set as On or Off.
♦ Alarm Settings V. Patern: Yes or No. When alarm occurs, test pattern is
displayed
Signal: Yes or No. When the signal is off the alarm occurs.
Video: Yes or No. When the video is off the alarm occurs.
Audio: Yes or No. When the sound is off the alarm occurs.
♦ Language Select the desired language from the available list.
♦ Info Current software version is displayed.
♦ Reset Settings Are you sure? “OK”- Yes, “MENU”- Exit
Default settings are loaded if “OK” button is pressed.
♦ Dynamic PMT It is selected as On or Off. PMT data is monitored and if any
changes occur, PID’s are changed accordingly.
♦ Baud Rate RS232 communication rate
To Next Page
Loading...