DRX 3200 / 3210 PROFESSIONAL SATELLITE RECEIVER
7
SW Setup
You can enter your defined 12 character SW with using “◄”/“►” buttons to change hex
character and “OK” button to move the cursor.
DVB Subtitle
Subtitle and Language
If the channel has DVB subtitle service, the subtitle can be displayed on the picture by using
this feature. If there is more than one subtitle language, the desired language is selected on
Language line.
* S u b t i t l e O n
L a n g u a g e
SETTING AUDIO
Select Audio submenu from the Installation menu. Select Mode by using “◄”/“►” buttons.
There are Mono, Stereo, Left and Right audio modes and you can control volume level.
Volume can be changed from 0 to 31.
* M o d e M o n o
V o l u m e 3 1
SETTING VIDEO LEVEL
Select Video submenu from the Installation menu. Video output signal level can be increased
or decreased. Video Level can be set from 95 to 105. The default value is 100 and it
corresponds to 1vpp.
* L e v e l 1 0 0
BLANK OR FREEZE SCREEN ON BROADCASTING CEASE
Select Video submenu from the Installation menu. If Blank is made Off, the last picture
remains on the screen while broadcasting is cutoff. If Blank is made On, the screen becomes
blank.
* B l a n k O n
VIDEO SYSTEM SETTINGS
Select Video submenu from the Installation menu. You can set video system as PAL, NTSC
or SECAM on System line.
* S y s t e m P A L
NO SIGNAL MESSAGE SETTING
Select Video submenu from the Installation menu. If you set No Signal to On “No Signal”
message is displayed on the screen while broadcasting cutoffs.
* N o S i g . M s g O n
To Next Page
Loading...