Back to Title and Contents
NOTE: If a Password is enabled in the VNC
General Settings, you must also enter the
same password to access the Remote feature
in Link-Live.
1. If you have AllyCare, sign in to Link-Live.com
to access the Link-Live Remote feature. Your
CyberScope Air must be claimed.
2.
Navigate to the Units page at Link-
Live.com.
3. Select the CyberScope Air you want to
remote control from the list of claimed
units.
4. Click or tap the REMOTE icon at the top
right of the page to open an embedded
window containing the CyberScope Air
interface.
5. If necessary, at the top of the window, enter
the Password set in General Settings > Man-
agement > VNC on the CyberScope Air unit.
To use the Link-Live website while your remote
session is active, you must open a new Link-Live
tab or window.
Software Management
128
To Next Page
Loading...