netAlly CyberScope Air - Channel Test Settings

Signal Level Thresholds: Measured signal from
the AP
Signal-to-Noise (SNR) Thresholds: Ratio of
measured AP signal to noise level detected on
the channel
Retries Thresholds: Retry frames as a
percentage of total transmitted frames
Transmit Rate (TX) Thresholds: Measured rate
as a percentage of the AP's maximum
throughput rate
Alternate ID
Enter an Alternate IDif necessary. This is an
Advanced Authentication setting.
Channel Test Settings
Open Channel Test settings to configure
Utilization thresholds for the channel test
portion of the Wi-Fi profile.
AutoTest App and Profiles
247