select Refresh Discovery from the main
Discovery list screen.
SNMP Configuration
The MIB (Management Information Base) of
SNMP managed devices contains information
such as device configuration, interface con-
figuration and statistics, SNMP tables (like host
resource and route tables) and VLAN details.
Through the Discovery process, the CyberScope
Air interrogates MIBs to determine the device
type, ports, connected subnets, and other data.
SNMP credentials are required to communicate
with the SNMP agents on your interconnect
devices, such as switches and routers. The
Discovery Settings allow you to enter the SNMP
community strings and credential sets the
CyberScope Air uses to communicate with those
devices.
SNMPv1/v2
Tap the toggle button to enable or disable
SNMPv1 and v2 queries. This setting is enabled
Discovery App
456
To Next Page
Loading...