Extended Ranges
The Extended Ranges screen allows you to enter
addresses of non-local subnets on which you
want the Discovery process to run. Discovery
sweeps all of the enabled Extended Ranges for
devices, whether directly connected or off-net.
The CyberScope Air performs Ping sweeps on
subnets that are not directly connected and ARP
sweeps on connected subnets.
When the SNMP agents are on a subnet that is
separate from the hosts (PC's and servers)
subnet, additional networks must be configured
for discovery:
l
The network address of the remote subnet
you want to discover, meaning the host (PC
and server) network.
l
The network address of the switch and
router SNMP agents in the remote subnet,
e.g. a management subnet.
Configure both SNMP Credential Sets and
Extended Ranges to ensure that the CyberScope
Air always discovers management subnets,
regardless of your network port connections.
Discovery App
451
To Next Page
Loading...