Test Port Notifications
Active network connections on the test ports are
established using the AutoTest app.
or The Wi-Fi Test Port status displays
with the wireless channel number under a Wi-Fi
or Link icon. Channels in the 6 GHz band display
with an E by the Wi-Fi or Link icon.
When the CyberScope Air unit is
dwelling on a Wi-Fi channel (in this case
channel 64), the channel number is static.
When the CyberScope Air is scanning for
discovery, Wi-Fi analysis, or air quality meas-
urements, the channel number changes
dynamically to show which channel is
currently being scanned.
Periodic AutoTest is running or has
completed. When Periodic AutoTest is running,
the Wi-Fi Test Port may not be available to other
testing apps.
General Settings and Tools
86
To Next Page
Loading...