netAlly CyberScope Air - Page 214

connected to a different AP with a better
signal strength. This behavior is partly con-
trolled by the Roam Threshold in the Wi-Fi
Connection settings.
AP: Name, IP, or MAC address of the AP to which
the Tester is connected, depending on the
information CyberScope Air can see about the
AP. This field shows the custom User Name if
one has been entered. See Assigning a Name
and Authorization to a Device in the Wi-Fi app
chapter.
BSSID: BSSID of the access point
Channel: Channel number on which the AP is
operating
Last Roam From: If the CyberScope Air has
roamed to a new AP, the previous AP's name,
BSSID, and Channel display.
AP: APfrom which the AP last roamed
BSSID: BSSID of the access point
Channel: Channel number on which the AP is
operating
AutoTest App and Profiles
214