netAlly CyberScope Air - Page 245

Wi-Fi Band
Tap this setting to specify the wireless band(s)
on which the Wi-Fi Profile attempts to connect.
The default setting of Auto allows the unit to
connect on any band. Note that the Profile fails
to link if this setting conflicts with the selected
bands in General Settings.
Roam Threshold
This threshold controls the Signal Strength (in
dBm) at which CyberScope Air stays
connectedand looks for another AP on the
network with a stronger signal. If found, it
disconnects from the current AP and connects to
the AP with a stronger signal. Tap the field to
select a new value or enter a custom one.
Link Test Thresholds
Open the Link Test Thresholds screen to adjust
the values that determine Success/Warning/Fail
results for the following measurements.
AutoTest App and Profiles
245