netAlly CyberScope Air - Page 249

l
Tap the toggle button to enable or disable
test grading based on 802.11 utilization.
l
Tap Warning or Failure to select or enter
custom percentage values for Warning or
Failure results.
Non-802.11 Utilization Threshold (%)
This threshold controls the
Success/Warning/Fail gradings for the
percentage of the connected channel's capacity
being used by non-802.11 interference.
l
Tap the toggle button to enable or disable
test grading based on non-802.11 utilization.
l
Tap Warning or Failure to select or enter
custom percentage values for Warning or
Failure results.
DHCP, DNS, and Gateway Settings
See DHCP, DNS, and Gateway Tests
Test Targets
Tap the Test Targets field to open the Test
Targets screen and add custom Ping, TCP
Connect, HTTP, or FTPPing, TCP Connect, HTTP,
AutoTest App and Profiles
249