netAlly CyberScope Air - Page 312

Specifying a transfer size that is greater than
file being retrieved does not cause the test to
fail. The test stops when the file has finished
downloading.
l
When the Direction setting is Put, the default
transfer size of ALL causes the CyberScope
Air to create and upload a file that is 10MB.
Direction
Tap the toggle button to switch between a Get
(download the File from the server) or Put
(upload the File to the server) test.
l
If Direction is set to Get, the file is retrieved,
and the size and data rate are calculated.
This data is discarded as soon as it is down-
loaded and is not retained on the Cyber-
Scope Air.
l
If Direction is set to Put, the File named
above is created on the FTP server. The size
of this file is determined by the File Transfer
Size setting. The file contains a text string
indicating that it was sent from the Cyber-
Scope Air, and the test string is repeated to
produce the set file size.
AutoTest App and Profiles
312