Interface:Tap the field to select the CyberScope
Air port from which the port scan runs. (See
Selecting Ports for explanations of the different
ports.)
Scan List:Tap this field to edit the list of port
numbers that get tested during the port scan.
You can enter port numbers or ranges,
separated by commas.
Timeout Threshold:Tap this field to select a
value for how long the CyberScope Air waits for
a response from each port or to enter a custom
value. The scan ends after all the ports in the
Scan List have had this amount of time to
Discovery App
480
To Next Page
Loading...