dwell time. This gives an exact meas-
urement. However, in congested envir-
onments any beacons not seen during the
dwell time are not included in that sample
point.
3. Connected (Active) collects data from the
linked connection of the Wi-Fi Test port.
NOTE:Selecting this method disables the
AirMapper settings for Dwell Time and
Override Bands and Channels.
Dwell Time
(Enabled for passive survey modes only.) Tap
Dwell Time to select choose a preset dwell time
or enter a custom value. See the General
Settings for additional information about dwell
time.
AirMapper™ App
579
To Next Page
Loading...